Understanding some maintenance techniques and methods of buckle can extend the service life of buckles

1. During normal use, pay attention to whether there are any problems such as "broken belly", "detoothed", and skew on the buckle. If the buckle is loose and loose, you can use a small hammer to lightly tap the buckle head a few times to make the upper and lower teeth bite tighter, and you will not lose the tooth;

2. Buckles of aluminum alloys are relatively susceptible to corrosion, so they should be kept dry and not damp to prevent white oxides from forming on the aluminum teeth. Over time, the buckle will rust and affect the use. At the same time, be careful not to be alkaline Contact with acidic substances. When storing, ensure a certain degree of ventilation. Do not store it in a sealed state or in an environment full of moisture. If necessary, use moisture-proof paper or dehumidifier. If the buckle gets awkward when it gets wet, at this time, let the buckle dry for a while, then apply some wax to the buckle teeth, and then roast it with fire, so that it will be very lubricated when used in this way;

3. When pulling the buckle, you should first align the teeth on both sides, then hold the buckle head and pull it gently along the track. Do not pull hard, so as not to cause "teeth skew", "broken belly" and "tooth removal" . If the buckle is astringent and the pulling is not flexible, you can wipe it with a cloth and then apply a layer of white wax on the "teeth";

4. Don't overfill all kinds of bags, pockets or wallets with buckles, otherwise the buckles will easily cause "broken belly", "off teeth", skew and soft cloth.

Dongguan Zhenming Hardware Plastic Technology Co., Ltd. specializes in customizing hardware nameplates, mainly producing eyelet、buckle、puller 、nameplate、aglet、carabiner、snap hook、metal buckle、button、shoelace、keychain.

It is the honor of Zhenming to serve you. It is Zhenming's pursuit to exceed your expectations. Welcome to discuss cooperation and create brilliant together!

For more product information, please contact: Mr. Zeng 13728219269 Website: http://www.kmhardware.com/