After using the zipper puller head for a long time, some minor problems may occur, but if we can take good care of it in normal times, the service life of the zipper puller head can be longer. Below, just follow Zhenming zipper puller head manufacturer to see how to maintain the zipper puller head!

1. During normal use, pay attention to whether there are any problems such as "broken belly", "detoothed", and skew on the zipper puller. If there are any such problems, they should be repaired in time, and no more deadlifting. If the zipper puller is loose and loose, you can use a small hammer to lightly tap the zipper puller head a few times to make the upper and lower teeth bite tighter.

2. The zipper puller of aluminum alloy is relatively susceptible to corrosion, so it should be kept dry and not damp, to prevent the aluminum teeth from generating white oxides, which will cause the zipper puller to rust and affect the use over time. Contact with acidic substances.

When storing, ensure a certain degree of ventilation. Do not store it in a sealed state or in an environment full of moisture. If necessary, use moisture-proof paper or dehumidifier. If the zipper puller gets astringent when it gets wet, then let the zipper puller dry for a while. Then, apply some wax to the zipper puller teeth and roast it with fire. This way, it will be very lubricated.

3. When pulling the zipper puller, you should first align the teeth on both sides, then pinch the zipper puller head and gently pull it forward along the track. Do not pull hard, so as not to cause "teeth skew", "broken belly" and "tooth removal" . If the zipper puller is astringent and the pulling is not flexible, you can wipe it clean with a cloth and then apply a layer of white wax on the "teeth".

4. Don't overfill all kinds of bags, pockets or wallets with zipper, puller otherwise the zipper puller will easily cause "broken belly", "de-teeth", skew and soft cloth.

Dongguan Zhenming Hardware Plastic Technology Co., Ltd. specializes in customizing hardware nameplates, mainly producing eyelet、buckle、puller 、nameplate、aglet、carabiner、snap hook、metal buckle、button、shoelace、keychain.

It is the honor of Zhenming to serve you. It is Zhenming's pursuit to exceed your expectations. Welcome to discuss cooperation and create brilliant together!

For more product information, please contact: Mr. Zeng 13728219269 Website: http://www.kmhardware.com/