The manufacturing process of clothing and luggage accessories hardware accessories is probably like this!

Clothing, luggage accessories and hardware accessories can be roughly classified according to the following: material, shape, color, specifications.

Clothing, luggage accessories and hardware accessories are divided into iron, copper, aluminum, zinc alloy and other die-casting hardware according to the material.

Clothing, luggage accessories and hardware accessories are divided into tie rods, small wheels, mushroom nails, bump nails, foot nails, hollow nails, sliders, corns, D buckles, dog buckles, needles, belt buckles, chains, etc. according to specific product categories. Coils, locks, magnetic buttons, various trademarks and decorative hardware, etc. All kinds of hardware have different divisions according to function or shape. And various hardware accessories also have many specifications.

Clothing, luggage accessories and hardware accessories have many colors according to electroplating: white, gold, gun black, green bronze, green sweep, chrome and so on. There are also many points to pay attention to in electroplating. Different electroplating colors have different process requirements. Exporters should pay attention to compliance with environmental protection and non-toxic requirements.

Manufacturing process of hardware accessories for clothing and luggage accessories

1. First of all, a new product is to be produced in the hands of the manufacturer. The production of the mold is very critical. The first condition for a product to be in the hands of the manufacturer is that the manufacturer must know how to make the mold, because you don’t know how to make the mold. I am not sure if I can make this product.

2. The second step is to put the die-casting product on the die-casting machine.

The die-casting machine is divided into tonnages. The general luggage hardware accessories generally use 25-tonnage die-casting machines. It is also very skillful to use the die-casting machine to build the products well. This depends on the technology of the master of the compactor. When the pressure is too high, the product will have a lot of burrs and it takes a lot of electricity. If the pressure is too low, the surface of the product will be bumpy, and the surface of the product will not be smooth and uneven. Therefore, the master of the press must control the machine to get a good shot. product!

3. Enter the third step of polishing, which is a very important part in the production process of luggage hardware accessories products. Just like women's jewelry, the sparkles are very bright and smooth because they are highly polished and polished before electroplating. The effect of the light is actually in the line of luggage hardware accessories. It is the same process as many manufacturing processes of jewelry and other hardware products. So what you want to do is smooth and shiny is to do a good job of polishing.

4. The fourth step is to put on the feet, because you want to fix the product on the bag, you need to put on the iron feet. The iron wire is fixed on the feet by die-casting. Previously, it was pressed with a three-ton punch press. Now I am using a machine bench drill to press down and fix it. Now I use a bench drill rig. The technology has also improved, and the production tools have also been changed! There is also a link that some of them are screwed, so we need to tap a screw hole. Come out, here I use a tapping machine to tap a screw hole out!

5. The popular point of the fifth step is to color the product electroplating! Electroplating here depends on the technique of the electroplating master. First, wash the impurities in the product area with sulfuric acid, and then give the product a bronzed thing. It is the primer. The thicker the primer, the better, and then put it in the electroplating tank for electroplating If the electroplating time is too long, if it is too short, it will be even worse. After the electroplating is completed, each product will be sent to the customer through packaging!

Dongguan Zhenming Hardware Plastic Technology Co., Ltd. specializes in customizing hardware nameplates, mainly producing eyelet、buckle、puller 、nameplate、aglet、carabiner、snap hook、metal buckle、button、shoelace、keychain、no touch keychain and door opener.

It is the honor of Zhenming to serve you. It is Zhenming's pursuit to exceed your expectations. Welcome to discuss cooperation and create brilliant together!

For more product information, please contact: Mr. Zeng 13728219269 Website: http://www.kmhardware.com/