How are the hardware accessories on our bags produced?

1. Abrasives

Luggage hardware accessories are required to make abrasive tools. The production of abrasive tools is very important. The first requirement for a product to be in the hands of this manufacturer is that the manufacturer must know how to make abrasive tools. Out of this product.

2. Die casting products

Put the finished abrasive tool on the die-casting machine to die-cast the product. Die-casting machines are divided into tonnages. Ordinary luggage hardware accessories generally use 25-ton die-casting machines. It is also very skillful to use die-casting machines to make products. This depends on the skill of the master of the press. It is necessary to control the pressure. If the pressure is too high, the product will have a lot of burrs and consume electricity. If the pressure is too low, the surface of the product will appear uneven and uneven. Therefore, the press master must control the machine to produce a good product! After typing it out, you must break the material.

3. Polishing

This is a particularly important link in the production process of luggage hardware accessories. Just like women’s jewelry, it is very shiny and smooth because it is highly polished and then electroplated to produce such a shiny effect. In fact, luggage hardware In the accessories industry, Belden has the same process as jewelry and other hardware products, so if you want things to be smooth and shiny, you should polish them.

4. Upper foot piece

Because the product is to be fixed on the bag, the iron wire foot piece is required. The iron wire is fixed on the foot piece by die-casting. In the past, it was pressed with a three-ton punch, but now it is pressed with a machine bench drill. Fix it. Now I use bench drills. The technology has improved and the production tools have been changed! Another link is that some of them are screwed, so we need to tap a screw hole. Here we use a tapping machine. Tap a screw hole out!

5. It is to add color plating to the product

Electroplating depends on the technique of the electroplating master. First, sulfuric acid washes the impurities in the product area, and then the product is primed with a bronzer. The thicker the primer, the better, and then put it in the electroplating tank for electroplating If the electroplating time is too long or too short, it is even worse. After electroplating, each product will be removed from the shelves.

The above is the production process of our favorite luggage hardware accessories!

Dongguan Zhenming Hardware Plastic Technology Co., Ltd. specializes in customizing hardware nameplates, mainly producing eyelet、buckle、puller 、nameplate、aglet、carabiner、snap hook、metal buckle、button、shoelace、keychain.

It is the honor of Zhenming to serve you. It is Zhenming's pursuit to exceed your expectations. Welcome to discuss cooperation and create brilliant together!

For more product information, please contact: Mr. Zeng 13728219269 Website: http://www.kmhardware.com/