The so-called luggage hardware is the hardware accessories that are suitable for luggage. What are the common inspection methods for the types of luggage hardware? The following cherished shoe buckle manufacturers will answer the test method for the type of luggage hardware.

1. Luggage hardware accessories are inserted into the lock type. Whether the surface plating is uniform, bright, whether the corners are scratched, whether the insertion is flexible, whether the screws are matched, and the tension of the 18LBS must be withstood after the plug is inserted.

2, pull the card D buckle or circle type: the diameter of the D buckle or circle, the thickness of the iron wire, check the tightness of the wire interface, whether it is scratching, and then carry out the tensile test, not less than 15LBS, hand-pull D button and circle plating is OK, the pulling force must not be lower than 28-60KG, the other the same as above.

3, the torque of the pull tab conventional 3# rotation of 2.5KG is OK, 5# pull the left and right of each rotation 4KG, 8# pull the left and right of each rotation 6KG, 10# pull the left and right of each rotation 8KG.

4, luggage hardware accessories dog buckle type inspection method: whether the plating is OK, color difference, whether the switch is flexible, scraping the hand, the inner diameter of the dog buckle, measuring the thickness of the wire, and then the tensile test, the decorative dog buckle must bear low At 8KG, usually 28-60KG.

5, square buckle type, whether the plating is uniform, scratching the hand, measuring its inner diameter, and then measuring the width of its iron wire, must withstand the 28-60KG tensile test.

6, magnetic buckle, whether the plating is uniform, scratching the hand, the diameter of its diameter, the tightness of the gasket and the ear, the magnetic opening degree must be able to withstand the most loose can not be less than 2LBS, the most tight can not be higher than 8LBS. in this way.

7. Needle buckle type, whether the plating is uniform, the hand is scraped, the length of the pin is OK, flexible, the inner diameter and the thickness of the wire are measured, and the force of the pin buckle should not be lower than 28KG.

8. Iron chain type, whether the interface is tight, whether the plating is uniform or not, there is no sign of oxidation and rust, whether it is hand-scraping, the decorative chain must withstand the pulling force of not less than 15LBS.

9. There are decorative fake drills on the surface of the luggage hardware accessories. Whether the plating surface is uniform, bright, whether the fake diamond is reflective or not, whether the position between the sham drills is uniform, and whether there are signs of oxidation and rust.

Dongguan Zhenming Hardware & Plastic Technology Co., Ltd. specializes in R&D, production and sales of luggage hardware. Products include dog buckle, alloy jewelry, hardware label, shoe buckle, shoe buckle accessories, shoe buckle hardware, luggage buckle, luggage hardware buckle , luggage hardware accessories, eyelet，aglet，puller，nameplate，etc.